GREEN ZAPPER AUTO FILTER
OPERATION
The Green Zapper is an attack sensitive auto EQ filter stomp-box for electric guitar.
The Green Zapper is a warm and musical auto filter pedal that will add movement and dynamics to your sounds. The pedal uses a band-pass filter that sweeps through a frequency range as you play. The initial attack of your playing pushes the filter up into high frequencies, and then it sweeps back down to low frequencies as the notes decay. The harder you play, the higher the frequencies go before coming back down. The effect is like a wah-wah pedal that tracks your playing dynamics.
The Green Zapper is housed in a tiny 2” x 2” enclosure that’s sure to squeeze onto any pedal board. Step on the footswitch to turn the pedal on and off. The LED lights up to indicate that the circuit is active. The powered circuit is completely removed (true bypass) from your signal chain when the pedal is off.
Internal Controls
RANGE – trimpot near top of circuit board when foot switch is down and LED is up. This control sets the width of the frequency range that the circuit sweeps.
SENSITIVITY – trimpot near lower right of circuit board when foot switch is down and LED is up. This control determines how sensitive the effect is to your playing dynamics and has been factory set for optimum performance with typical passive single coil pickups. Higher output single coils and humbuckers will require a lower setting to avoid fizziness at the top end of the sweep.